USD
Stringing Equipment 280kN Cummins Hydraulic Puller
Stringing Equipment 280kN Cummins Hydraulic Puller
This machine is mainly applied in long-span and mountainous areas and foothills for tension stringing of 4 bundle conductor of 500kV or twin bundle conductor of 220kV and conductor 800mm2 below, allowing for the tension stringing of 500kV haulage rope in various terrains.
Transmission Line Stringing Equipment Hydraulic Puller
Configuration
Hydraulic dynamometer with set-point and automatic control of maximum pull.
Hydraulic oil cooling system
Control instruments for hydraulic system and diesel engine.
On board reel winder with automatic level wind, suitable for standard reel mod.1400 and 1600
Hydraulic front stabilizer
Grounding connection point
Transmission Line Stringing Equipment Hydraulic Puller
Main configuration instructions
Engine: cummins
Main variable pump: German Rexroth
The main motor, reduction gears: German Rexroth
Tailstock motor: America Eton
Hydraulic instrument: German WIKA
Operating handle: German Rexroth
Tail bracket hydraulic valve: Atos Italy
Transmission Line Stringing Equipment Hydraulic Puller
| Model | GS40 | GS60 | GS90 | GS120 | GS150 | GS180 | GS220 | GS280 | GS380 | |
| Max intermittent pull | KN | 40 | 60 | 90 | 120 | 150 | 180 | 220 | 280 | 380 |
| Max continuous pull | KN | 30 | 50 | 80 | 100 | 120 | 150 | 180 | 250 | 350 |
| Speed at max pull | km/h | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Max speed | km/h | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Pull at max speed | KN | 20 | 25 | 40 | 50 | 60 | 75 | 90 | 120 | 170 |
| Diesel | kw(hp) | 77(103) | 77(103) | 118(158) | 129(173) | 129(173) | 239(320) | 239(320) | 298(400) | 440(590) |
| Cooling system | Water | Water | Water | Water | Water | Water | Water | Water | Water | |
| Electrical system | V | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 |
| Bull-wheel diamete | mm | 400 | 450 | 540 | 600 | 600 | 700 | 760 | 960 | 960 |
| Groove number | 7 | 7 | 8 | 10 | 10 | 10 | 10 | 11 | 11 | |
| Max rope diameter | mm | 16 | 18 | 21 | 24 | 24 | 27 | 30 | 38 | 38 |
| Max diameter of rope reel | mm | 1200 | 1400 | 1400 | 1400 | 1600 | 1400 | 1600 | 1600 | 1900 |
| Total weight | kg | 3000 | 3500 | 4680 | 4800 | 5500 | 6800 | 6800 | 12800 | 13600 |
| Dimensions of the whole machine | mm | 3600*2600 *2200 | 3800*2100 *2300 | 4000*2200 *2100 | 4000*2300 *2300 | 4300*2300 *2400 | 4300*2360 *2380 | 5300*2360 *2750 | 5800*2300 *2700 | 6000*2600 *2800 |
Transmission Line Stringing Equipment Hydraulic Puller
Hydraulic Transmission (Stringing Equipment 280kN Cummins Hydraulic Puller)
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Additional Devices (Stringing Equipment 280kN Cummins Hydraulic Puller)
Lighting system for the trailer
Hydraulic rope clamp for reel change
Swivel guide rope roller
Trailer for towing at max speed of 30 km/h
Extra shaft
Digital speed and meter counter (extra charge)
Stringing Equipment 280kN Cummins Hydraulic Puller
Best Sale
-
9%OFF
- Home
- All Products
- Company Introduction
- Blog
- Contact Us
Your cart is currently empty.